Joists are generally spaced 16 inches (406 mm) OC in conventional framing. They may be spaced 12, 16, 19.2, or
Tag: Know-How
Large openings in floors should be framed before floor joists are installed. This is because room is needed for end-nailing.
Voltage in an electrical circuit is like pressure in a water system. To say that voltage flows through a circuit
The bevel angle on the corner boards should be oriented the correct way, thereby allowing water to run down the
Wood I-joists have perforated knockouts for plumbing pipes or electrical wiring, or another option is to attach the pipes to
This is an excellent diagram illustrating the terminology and components of a typical residential deck. It shows an exploded view,
In the usual order of installation, the floor frame consists of girders or beams, posts or columns, sill plates or
Thinking about adding a shed to your backyard this summer? A great plan is the key to success, and this
Choosing the right nail gun doesn’t have to be complicated! Think of it like picking the right paintbrush for a
There are several methods of framing a building. Some types are used less often today but still exist, so knowledge
It’s a practical guide for ensuring the structural integrity and longevity of wood post installations in framed structures Several critical
Sawhorses are used on practically every construction job. They support material that is being laid out or cut to size.
This video outlines the most common installation pitfalls and how to avoid them. Here are the key takeaways: 🛠️ Common
The foundation plan is drawn at the same scale as the floor plan. It is a view from above of
A defect in lumber is any fault that detracts from its appearance, function, or strength. One type of defect is
The right flooring should match your desired look and durability needs, without costing you an arm and a leg. Wood
Overall Purpose: This comprehensive diagram serves as an excellent resource for understanding the foundational terminology and construction methods used in
Types of Windows: The Eyes of a Building Windows are more than just transparent openings in a wall; they’re the
Woods are classified as either hardwood or softwood. There are different methods of classifying these woods. The most common method
1. Feather edge:* Description: This is a classic overlapping siding where each board is tapered in cross-section, thinner at one
Load More